|
|
|
FMD AXIAL FLOW FANS
Through Axial Flow Fans, the air
or gas flows parallel to the impeller axis. FMD Axial
Flow Fans cover a wide range of air quantities and
pressures and are suitable for common ventilation plants
as well as special industrial installations. The
impeller of axial flow fans is mounted on the motor
shaft in a casing. It can be mounted on an extended
shaft for V belt drive
FMD DUST COLLECTORS
Fabric / Bag filter type dust
collectors are specially used for collecting
minute dust particles The dust which is filtered from
the gas stream collects on the inside of the bags. It is
then removed from the bags by manual / mechanical
shaking, or pulse jet cleaning. The fabric bags are made
of acrylic polyester, polyester, polyester needle felt,
polypropylene nylon, terrylene, anti static etc.
depending upon requirements.
Must for collection of Dry Dust
'At Source in industries. Can be used as original
equipment with original equipment with capsule Polishing
Machines, tabletting Machines, Surface grinders, Tool
and cutter grinders, Buffing machines, Wood Working
Industries and also for carbon dry power collection FMD
Dust Collectors provides clean working conditions,
increase operator efficiency and prolongs machines life.
The unit is compact, inexpensive and occupies minimum
space,
FMD CENTRIFUGAL FANS
FMD Centrifugal fans are
designed for ventilation, dust collection, fume
extraction systems, material handling and electronic
panel cooling etc. These fans are statically and
dynamically balanced can be made available with
protective coating viz. Epoxy Rubber, Fiberglass, PVC
etc. These fans can be supplied with flameproof motors.
FMD AIR CURTAINS
FMD air curtains work as a
thermal barrier preventing temperature looses by keeping
cool air in and warm air put in summer and vice versa in
winter. these are specially designed for shops, cold
storages, hotels, offices, frozen food shops,
pharmaceutical industries and hospitals
FMD ROTARY AIR LOCK FEEDERS
They are used to control the
discharge rates of fine or granular free flowing, dry
solid materials between parts of a system at equal
pressure or with minimum air loss under differential
pressure conditions.
FMD FUME SCRUBBERS
FMD Fume Scrubbers are useful
for scrubbing obnoxious fumes such as silicon
tetraflouride, super phosphate, phospheric acid and
flourine etc.
These are generally available in
packed bed type and cyclonic type.
|
FMD CYCLONE SEPARATORS |
 |
FMD Cyclone Separators are
normally used for the collection of the coarse dust
particles. In a cyclone separator, dusty air is
introduced at the top of a cyclone separator, dusty air
is introduced at the top of a cyclone through the inlet
pipe located tangentially to the cylindrical portion.
The gases, then move downwards in a whirling motion,
forming a peripheral vortex and giving rise to
centrifugal forces, resulting in a throwing of the dust
particles towards the walls, which then move downwards
into the hopper and are removed through the draw -
off pipe. The gases, after reaching the end of the
conical portion change direction and move upwards
towards the outlet, forming an inner vortex in this
upward movement of gases against gravity, more dust
particles are separated and fall into a conical hopper
for subsequent removal |
| Industrial Air Pollution Control System
| | Kitchen Exhaust & Fresh Air Supply System
|
|
Products List